RDI and the development of students' management and RDI skills and common development of the business area. More than half of respondents (57%) were of the opinion that the course realization was also taken into account. 57% of the students felt that entrepreneurship was also included in the design of the studies.
The teaching was professional, it was reflected in the cooperation of the teachers and the closeness of working life. 88% of the students said that in the work of the teachers, visible cooperation was seen and the teachers left room for the expertise of other teachers. 88% of students rated team teaching as practical, as well as the application of theory and practice.
The design has taken into account the challenges of the future world of work. As you can see, the first step starts with the detection and location of the face in the image.
Introduction
DESIGN OF PLC BASED SMART ELEVATOR CONTROL. Kazakh University of Technology and Business Administration, Astana, Kazakhstan). Summary— This project is about the design and control of a smart elevator system using Siemens PLC S7-1200. On each floor of the elevator, the HMI panel is installed together with the limit switches.
The relay outputs of the programmable logic controller were used to drive 2-wire DC motors forward and backward. In addition, this article presents a ladder logic diagram that describes which algorithm was used to control the system.
Control system of the elevator
Parallelization technologies
- MapReduce in building LM
- Parallelization in Kaldi
During the research, parts of speech recognition processes are examined to identify tasks that can be parallelized. Two main tasks were distinguished, which take a little time when running on a single machine. This is necessary to build a language model which will later be converted to ARPA format.
It implements a rigorous programming model; however, it offers its users technical options, such as machine error handling, as well as an automatic processing propagation. Speech recognition research using Kaldi tools was performed on a single machine as it can easily be configured to run on a single machine if it is a supercomputer. Also, the aspect that should be taken into account during the research is the size of the language model.
The decoding task depends on the size of the LM and requires approximately 6 Gb of RAM. Therefore, the new approach using SGE was implemented due to the availability of cost-effective, highly powerful nodes and network tools.
Experiments and Results
Moreover, the corpus may grow in the future and the need to build a language model will increase again. Therefore, the Hadoop cluster was built on seven nodes, where each node has 8 Gb of RAM and 4 cores. The results obtained with the MapReduce platform were significant, as can be seen in Section 3.
The currently used version in the said system is 6.2u5; SGE has proven itself over time and previously made versions are still stable and widely used. Furthermore, several open-source possible tools exist for SGE, however, the built-in platform in the said system refers to the version currently supported by Oracle. The grid cluster is built with 13 machines where each node has 8 cores and 16 Gb RAM, and 4 virtual machines deployed on Openstack, with 8 cores and 32 Gb RAM.
The results obtained using the SGE platform were significant which can be seen in Section 3.
Conclusion
Graduate student at Department of Information Technologies, Kazakh University of Technology and Business, Astana, Kazakhstan,. 2 Associate Professor, candidate of technical sciences, head of the department of information technologies, Kazakhstan University of Technology and Business, Astana, Kazakhstan). This review is a description of a haptic interface used to teleoperate complex anthropomorphic robotic systems in an intuitive way.
The system allows six degrees of freedom when attached to two human limb points. However, manipulating the end effect of the robot using only your fingertips provides greater precision. The position and orientation of the pen are tracked via encoders in the robotic arm.
Although vision systems provide a lot of information about the environment, they require a lot of attention from the operator. One of the first approaches was achieved to test the methodology, study and develop a haptic interface that can be used to remotely control complex anthropomorphic robotic systems in an intuitive way.
Conclusion
Өндірістік тәжірибеде мұндай модельдің жетістігі көп жағдайда қажетті ақ қағаздың болмауына және өнімнің айқын күрделілігіне байланысты өте белгісіз болып келеді [1]. Нақты ықтималдық моделі көлемді модельдің ерекше жағдайы (тиімділік функциясы 1-ге тең болғанда) деген қорытынды жасауға болады. Өндірістік жағдайда нақты деректердің жоқтығы немесе болмауы, мәліметтерді жинау үшін эксперимент жүргізудің қиындығы немесе мүмкін еместігі, тәжірибеде математикалық модельді валидациялаудың тәжірибелік-тактикалық әдісі дайындықты тиімсіз етеді [1].
Тексеру және мәліметтерді жинау бөлімінде пик шыңының шығуындағы гипогенизацияның (у1) мөлшерін бағалау үшін жеткілікті статистикалық ақпарат алынды. Көрсетілген бағдарламаның көмегімен алынған коэффициенттің мәні aijαq. Күкіртті y3 еритін қышқыл мен сілтілі y4 сипаттайтын модельдегідей анықтайды.
Сутегі көлемінің математикалық қатынасы - y1 (P-1 ең жоғары шығысы) стандартты режим параметріне (xi, i=1,5) сызықтық эмек жинақталған дәлдік әдісі арқылы анықталды. Суды тазарту процесінің шикізатымен байланысты оңтайлы жылдамдықты анықтау үшін сараптамалық білімге, динамикалық жинақтау логикалық алгоритміне және білім базасына негізделген лингвистикалық модель әзірленді. Эмпирикалық процедура мен айқын жұмыс жиыны әдісіне сүйене отырып, нақты жұмыс жиынын сипаттайтын дәлдік функциялары анықталды:
Мұнай өңдеу өнеркәсібіндегі каталитикалық риформатор кешенінің математикалық модельдік жүйесін әзірлеу// «Revista AtMGI» ғылыми журналы, 2009. f1,f2,..,fk параметрлерінің жиынын бағалау (мақсатты функциялар) vayutcya тиімді ppocecca, толық ультрадыбыстық. Кпитепии онноговые в коктав вектопного кпитепиа бемме назыльный, наппимеп изоды товапного ппдоку c uctanovki их качектва.
Для решения задач многокритериальной оптимизации (1)-(3) можно использовать один из эффективных подходов, основанный на идее выявления предпочтений ЛПР, и одновременно исследования мы используем допустимый набор действий для поиска эффективных решений. Для решения задач многокритериального выбора (1)-(3) (при значении множества уровня α=1) используется алгоритм, основанный на использовании методов прямого поиска [1]. Этот алгоритм является обобщением метода симплексного поиска на случай решения задачи многокритериальной оптимизации.
Такой алгоритм эффективно используется, когда значения локальных критериев расплывчаты и ЛПР хочет получить гарантированный результат. Особенности предлагаемого алгоритма включают в себя; улучшение значений локальных критериев при некоторых фиксированных значениях опорных уровней fi* возможно только ценой понижения уровня а, т.е.
2 )sin(
Введение
Постановка задачи
Экспериментальная часть
Spectral analysis is one of the signal processing techniques to characterize the frequency content of the signal being measured. Decomposition of the spectral signal representation of a signal as a sum of harmonic signals at different frequencies;. Analysis of the spectral components of the signal to study the properties of the signal;.
In general, a periodic signal thus contains no time-dependent DC component and an infinite set of harmonic oscillations, so-called harmonic frequencies, multiples of the fundamental frequency of the sequence. If s (t) is an even function, everything will disappear and only the cosine terms will be present in the formula for the Fourier series. It can be applied to the signals and periodically, but it will require the use of the device with generalized functions [4].
Therefore, the scope of the FPGA is wide: IT and telecommunication network technologies, audio and video processing, industrial equipment, measurement and medical equipment, special equipment, etc. However, each environment for this type of development has its own characteristics, and it may be that Xilinx's coloring is more difficult due to the graphics editor's quirks. A possible parameterization of the modules allows to strongly modify the modules, depending on the requirements, for specified conditions.
The spectrum of a periodic signal is discrete, and represents a set of harmonic oscillations, a total of the original signal. The currents and voltages in the circuit under the influence of a signal described by differential equations, the various elements of the circuit and the method of their connection. This allows for a known response system to a simple signal, such as a sine wave of a certain frequency, to determine the response of the system to any compound signal and extend it to a series of sinusoidal oscillations.
Ержан А, Атанов С.К. Аппаратная реализация генератора случайных чисел на ПЛИС - Вестник Костанайского социального технического университета. Для этого в Arduino IDE встроена поддержка нескольких популярных недорогих программаторов, а большинство плат Arduino имеют разъем для внутрисхемного программирования (ICSP для AVR, JTAG для ARM). Arduino IDE от компании, основанной на arduino.cc, позволяет создавать собственные аппаратные и программные платформы без паяльника.
